D-GA4Q FUEL DISPENSER

D-GA4Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight: 310kg.

Dimension(L×W×H) : 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 45 20ft: 22

the product vary largely and different performance and failure as well. The following just introduce some general methods to solve troubles. 3.1. Inefficient performance The bad separate capacity present as: large foam appears in oil indicator as refueling, accuracy is affected. Maintenance methods and procedure as followed. Firstly to fuel dispenser check the nut and plug on strainer whether loose, whether leakage at joint face as stopping operation. If failure is still exists after solve the sealing problem of strainer cover, conduct next progres fuel dispenser s. Check whether pipeline leakage between tank and fuel dispensers. The check method is to disconnect the end cover of strainer, and to find whether exist oil in low pressure chamber; if no oil or oil level go down slowly, there is some leaking places in pipeline or bottom valve. Inspect exhausting valve seat. Open upper cover and inspect the small hole at fuel dispenser exhausting valve seat whether stuck. If the hole is stuck or narrowed by waste, oil indicator would appear much foam due to air leaking into vapor separate chamber. The method to solve trouble is that dredge hole and clean groove, making enough area. Note that the area should don’t too large, large room easily causes leaking oil at exhausting pipe. Check vapor separate chamber. Under normal condition oil level in the chamber should keep a half capacity so that ensure air can’t reach into low pressure chamber. (Different products with various oil level). If there is no oil or low level in vapor separate chamber, the taper valve would not plug the hole of return oil valve seat, so as air reaching into low pressure chamber via taper valve and returned oil valve. The solution is that inspecting the axis of returned valve and the hole of returned oil valve seat. Reassembling them after solve problems. 3.2. Exhaust pipe leakage When tank position is higher than that of fuel dispenser, exhausting pipe will leak oil. Plugging exhausting pipe could solve leakage phenomenon. If found leakage on tank the following procedure

oncatenated sub-fields (completed by zeros if necessary):　　 1) most significant: the number of ATMs (1 to N) on two bytes　　 2) least significant: the number of channels (1 to x) on two bytes corresponding to the　　 application. This number is allocated dynamically by the monetics se fuel dispenser rver: one　　 number per application.　　 The service channel is identified by the number 0000.　　 During an exchange the monetics server alw fuel dispenser ays returns the logical channel identification　　 that it has received.　　 7.1.1.2. Application identification　　 Comprises two sub-fields:　　 1) identification of application software　　 indicates the identity of the corresponding application software to the application　　 fuel dispenser the alphanumeric data are framed on the left and are possibly completed on the right　　 by the space character (0X20)　　 the identification of application software is sealed (e.g.: CB0 EMV COF )　　 for messages exchanged on the service channel this field is filled with space　　 characters.　　 2) application number:　　 a number allocated dynamically by the monetics server (from 01 to 99) and　　 transmitted during the communication establishment procedure; the application　　 number in itself is insignificant　　 a monetics server for a given application always uses the same application　　 number whatever the logical channel used　　 for messages exchanged on the service channel this field is given the value 00　　 During an exchange the monetics server alwa

ts of America s consumers. Confidence improved faster than expected, according to the final September reading of the University of Michigan s index of consumer sentiment. It rose to 85.4, from 82.0 in August. In the euro area economic sentiment reached 109.3 in September, its highest level since February 2001 and one point higher than fuel dispenser in August. Annual inflation in the euro area slowed in September, to 1.8% from 2.3% in August. Unemployment ticked up from 7.8% in July to 7.9% in August. © 2006 . fuel dispenser  About sponsorship Output, demand and jobs Oct 5th 2006 From The Economist print edition © 2006 .  About sponsorship Prices and wages Oct 5th 2006 From The Economist print edition fuel dispenser © 2006 .  About sponsorship Economic forecasts Oct 5th 2006 From The Economist print edition Each month The Economist surveys a group of forecasters and calculates the average of their predictions for economic growth, inflation and current-account balances in 15 countries and the euro area. The table also shows the highest and lowest projections for growth. The previous month s figures, where they are different, are shown in brackets. The panel now expects America s GDP growth to slow to 2.4% in 2007, compared with September s prediction of 2.5%. The soothsayers think that the euro area will grow by 2.5% this year (up from 2.3% in September), then slow to 1.8% next year. Germany s growth in 2006 has been revised up from 2.0% to 2.3%. But Japan is now tipped to grow by 2.1% in 2007, down from September s prediction of 2.3%. The biggest upward revision is in the forecast for Sweden s growth it is now expected to be 4.4% in 2006, the fastest of all the economies in the table. © 2006 .